EOL: AUTODOME 800 Series HD PTZ Camera

AUTODOME 800 Series HD PTZ Camera
  • HD 1080p resolution at 30 images per second (ips)
  • Intelligent Tracking automatically detects and tracks an object in motion
  • 240x zoom (20x optical, 12x digital)
  • Quad video streaming generates simultaneous H.264, M-JPEG, and JPEG video streams
  • ONVIF conformant; provides interoperability with other conformant systems
  • Embedded Intelligent Video Analytics (IVA) for reliable detection, analysis, and search capabilities
  • High-impact, heavy-duty, tamper resistant aluminum housing with a high-resolution acrylic bubble
  • High-speed 360-degree continuous pan
  • Preset tour and AutoPan modes
  • Overview
    Imager 1/2.8-in.-type CMOS
    Number of Pixels Effective: Approximately 3.27 megapixels Delivered: Approximately 2 megapixels
    Aspect Ratio HD: 16:9
    Lens 20x optical zoom,(4.7 to 94 mm)
    Focus One-push (default), Automatic (normal, low), Manual
    Iris Automatic with manual override (F1.6 to F3.5)
    Field of View
    1080p Mode 2.9° (tele) to 55.4° (wide)
    720p Mode 2.0 (tele) to 37.6 (wide)
    Minimum Working Distance 10 mm (wide) to 150 mm (tele)
    Automatic Gain Control Automatic/Manual (–3 to +28 dB, +2 dB steps/16 steps)
    Synchronization Internal
    Aperture Correction Adjustable sharpness
    Digital Zoom 12x
    Sensitivity (typical)1 30 IRE2 , 50 IRE2
    Day Mode
    SensUP Off (1/30 [1/25] shutter);High Sensitivity Off 0.8 lux (0.074 fc) , 1.7 lux (0.158 fc)
    SensUP On, max.(0.25 sec. shutter);High Sensitivity On3 0.04 lux (0.004 fc) , 0.08 lux (0.007 fc)
    Night Mode
    SensUP Off (1/30 [1/25] shutter);High Sensitivity Off 0.12 lux (0.011) , 0.3 lux (0.028 fc)
    SensUP On, max.(0.25 sec. shutter);High Sensitivity On3 0.005 lux (.0005 fc) , 0.011 lux (.001 fc)
    Electronic Shutter Speed (AES) 1/1 to 1/10000 s, 22 steps
    Wide Dynamic Range (WDR) 86 dB (50 dB with WDR off)
    Signal to Noise Ratio > 50 dB (AGC off)
    Backlight Compensation On/Off
    White Balance Auto, ATW, Indoor, Manual, One-push, Outdoor, Outdoor Auto, Sodium Vapor Lamp
    Day/Night Monochrome, Color, Auto
    1. F1.6, maximum AGC. Normal light source (Halogen lamp).2. Tinted bubble adds 0.8 f-stop loss.3. Measured using ND1 + ND4 filters and recalculated with the transmission factor at 0.0025.
    Camera Setup/Control Via Internet Explorer Web browser version 7.0 or later, Bosch Configuration Manager or BVMS
    Software Update Firmware upload
    Standards H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
    Streaming Individually configurable streams in H.264 and M‑JPEG, configurable frame rate and bandwidth;
    1080p30 One (1) H.264 1080p30 stream plus one (1) M‑JPEG and one (1) I-frame stream
    720p60 One (1) H.264 720p60 stream plus one (1) M‑JPEG and one (1) I-frame stream
    720p30 Two (2) independently configurable H.264 streams: One (1) H.264 720p30 stream, One (1) H.264 BP+ or H.264 MP SD stream, plus one (1) M‑JPEG and one (1) I-frame stream
    GOP Structure IP, IBP, IBBP
    Data Rate 9.6 kbps to 6 Mbps
    Overall IP Delay 240 ms
    Resolutions (H x V) and Frame Rates
    Stream 1
    Full HD/1080p 1920 x 1080, 30 ips
    HD/720p 1280 x 720, 60 ips
    HD/720p 1280 x 720, 30 ips
    Stream 24
    SD/480p (WVGA)5 854 x 480, 30 ips
    SD/240p (WQVGA)5 432 x 240, 30 ips
    4. Stream 1 must be set to 720p at 30 ips.5. Images displayed in 16:9 aspect ratio.
    Network
    Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, RTSP, 802.1x, iSCSI, DynDNS, UPnP
    Advanced Networking IPv6, QoS
    Ethernet 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45
    Audio
    Standard G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC
    Signal-to-Noise Ratio >50 dB
    Audio Streaming Full Duplex / Half Duplex
    VG4-SFPSCKT
    Description Fiber Optic Ethernet Media Converter kit. Requires a small form-factor pluggable (SFP) module (sold separately).
    Data Interface Ethernet
    Data Rate 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port Full Duplex Optical Port
    Compatible Receiver CNFE2MC
    Installation Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware
    SFP Modules
    Description Interchangeable modules available for use with MMF or SMF optical fiber.
    Data Interface Ethernet
    Data Rate 10/100 Mbps IEEE 802.3 Compliant
    Mechanical
    Dimensions (LxWxH)
    SFP-2 and SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
    SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
    Weight (all SFP modules) 0.23 kg (.05 lb)
    Type Connector , Wavelength (transmit/receive) , Max. Distance
    SFP-2 MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles)
    SFP-3 SMF , Duplex LC , 1310 nm / 1310 nm , 20 km (12.4 miles)
    SFP-25 MMF , Single SC , 1310 nm / 1550 nm , 2 km (1.2 miles)
    SFP-26 MMF , Single SC , 1550 nm / 1310 nm , 2 km (1.2 miles)
    Fiber Compatibility
    Optical Fiber Compatibility, MMF 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
    Optical Fiber Compatibility, SMF 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652.
    Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
    Pan Range 360° cont.
    Tilt Angle 18° above horizon
    Variable Speed 0.1°/s-120°/s
    Pre-position Speed Pan: 360°/s Tilt: 100°/s
    Preset Accuracy ± 0.1° typ.
    Input Voltage 21-30 VAC 50/60 Hz
    Power Consumption, typical 55 W / 60 VA or 19 W / 35 VA6
    6. Without heater connected in power supply box for indoor applications.
    Protection on Video Peak current 10 kA (Gas Tube Arrester)
    Protection on Audio Peak current 10 A, peak power 300 W (8/20 μs)
    Protection on RS-232/485 ESD protection ±15 KV human body model
    Protection on Alarm Inputs Peak current 17 A, peak power 300 W (8/20 μs)
    Protection on Alarm Outputs Peak current 2 A, peak power 300 W (8/20 μs)
    Protection on Relay Outputs Peak current 7.3 A, peak power 600 W (10/1000 μs)
    Protection on Power Input (Dome) Peak current 7.3 A, peak power 600 W (10/1000 μs)
    Protection on PowerOutput (Arm Power Supply) Peak current 21.4 A, peak power 1500 W(10/1000 μs)
    10/100 EthernetData Lines Peak current 14 A, peak power 200 W (8/20 μs)
    Sectors/Titling 16 independent sectors with a 20-character title/sector
    Masking 24 individually configurable privacy masks
    Protocol Support Bosch (OSRD), ONVIF
    Pre-positions 99, each with 20-character titles
    Guard Tours Two (2) types of tours: Recorded tours – two (2), total duration 15 minutes Preset tour – one (1), consisting of up to 99 scenes, consecutively
    Supported Languages English, German, Dutch, French, Italian, Spanish, Portuguese, Polish, and Japanese
    Power, Camera 21-30 VAC, 50/60 Hz
    Power, Heater 21-30 VAC, 50/60 Hz
    Video and Control RJ-45 100 Base-TX Ethernet
    Alarm Inputs (2) Programmable for “normally open” or "normally closed"
    Open Collector Output (1) 32VDC@150 ma max
    Audio Input Line Level(one way audio)
    Input Voltage 5.5 Vp-p max
    Impedance 9 Kohm typical
    Design Rating IP66
    Operating Temp. –45°C to 55°C (–49°F to 131°F) or –10°C to 50°C (14°F to 122°F)8
    HALT9 Temp. Tests –70°C to 70°C (–94°F to 158°F)
    Storage Temp. –45°C to 70°C (–49°F to 158°F)
    Humidity 0% to 100% relative, condensing
    8. Without heater connected in power supply box for indoor applications.9. Highly Accelerated Life Tests. Maximum temperature limits.
    Dimensions See dimensional drawings
    Weight
    Indoor Pendant 2.88 kg (6.3 lb)
    Outdoor Pendant 3.03 kg (6.68 lb)
    Bubble Size 153.1 mm (6.03 in.) diameter
    Construction Material
    Housing Cast aluminum
    Bubble Acrylic (high-resolution)
    Standard Color White (RAL9003)
    Standard Finish Powder coated, sand finish
    Bubble
    Pendant
    Clear high-resolution acrylic VGA-BUBBLE-PCLA
    Tinted high-resolution acrylic VGA-BUBBLE-PTIA
    Pendant Arm Mounts
    Wall Arm (No Transformer) VG4-A-PA0
    Wall Arm (120/230 VAC Transformer) VG4-A-PA1 / VG4-A-PA2
    Pendant Arm with Wiring VGA-PEND-ARM
    Mounting plate for VGA-PEND-ARM VGA-PEND-WPLATE
    Trim skirt for AUTODOME Series Power Supplies VG4-A-TSKIRT
    Optional Mounting Plates for Arm Mounts
    Corner Mounting Plate VG4-A-9542
    Mast (Pole) Mounting Plate VG4-A-9541
    Pendant Pipe Mounts
    Pipe Mount Cap VG4-A-9543
    Pendant Roof Mounts
    Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Cap required. Available separately.) VGA-ROOF-MOUNT
    Optional Mounting Plates for Roof Mounts
    Flat Roof Adapter for Parapet Mount LTC 9230/01
    Power Supplies
    Outdoor Power Supply Box, no transformer VG4-A-PSU0
    Outdoor Power Supply Box (120/230 VAC Transformer) VG4-A-PSU1 / VG4-A-PSU2
    Fiber Optic Kit VG4-SFPSCKT
    Reference Description
    1 Wall Mount – Side with power supply
    1a Wall/Mast Mount – Side with VGA-PEND-WPLATE
    2 Wall Mount – Front with power supply and trim skirt
    2a Wall Mount – Front with power supply
    3 Wall Mount – Back with power supply and trim skirt
    3a Wall Mount – Back with power supply
    4 Pipe Mount
    Reference Description
    1 Wall Mount – Side with power supply and trim skirt
    1a Wall/Mast Mount – Side with VGA-PEND-WPLATE
    2 Wall Mount – Front with power supply and trim skirt
    2a Wall Mount – Front with power supply
    3 Wall Mount – Back with power supply and trim skirt
    3a Wall Mount – Back with power supply
    4 Pipe Mount
    5 Mast Mount
    6 Corner Mount
    7 Roof Mount
    8 Roof Mount Adapter
    9 Power Supply for Pipe and Roof Mounts

    Images

     

    Features

    360 H264 HD1080 IP66 IVA
     
    Onvif
     
  • Certificates (3)
     
  • Documents (21)
     
  • Software & Support (11)
     
 

Accessories

VG4-A-PA0 Pendant Arm Mount

Pendant arm mount with power supply box for a AutoDome Series cameras, no transformer, white

Commercial Type No.: VG4-A-PA0
Product No.: F.01U.009.671

 

VG4-A-PA1 Pendant Arm Mount with 120 VAC Transformer

Pendant arm mount with power supply box for AutoDome Series cameras with a 120 VAC transformer, white

Commercial Type No.: VG4-A-PA1
Product No.: F.01U.009.663

 
 

VG4-A-PA2 Pendant Arm Mount with 230 VAC Transformer

Pendant arm mount with power supply box for AutoDome Series cameras with a 230 VAC transformer, white

Commercial Type No.: VG4-A-PA2
Product No.: F.01U.009.664

 

VGA-PEND-ARM Pendant Arm with Wiring

Compatible with an AutoDome Series pendant housing

Commercial Type No.: VGA-PEND-ARM
Product No.: F.01U.261.947

 
 

VGA-PEND-WPLATE Mounting Plate

Mounting plate for VGA-PEND-ARM, compatible with an AutoDome Series camera

Commercial Type No.: VGA-PEND-WPLATE
Product No.: F.01U.247.809

 

VGA-ROOF-MOUNT Roof Mount

Roof parapet mount, white

(VG4-A-9543 Pipe Mount Cap required. Available separately.)

Commercial Type No.: VGA-ROOF-MOUNT
Product No.: F.01U.247.811

 
 

LTC 9230/01 Flat Roof Mount Adapter

For mounting a unit in an upright position on a flat surface for roof parapet mount VGA-ROOF-MOUNT

Commercial Type No.: LTC 9230/01
Product No.: F.01U.503.630

 

VG4-A-9541 Pole Mount Adapter

Pole mount adapter for a for an AutoDome Series pendant arm or a VEI-30 or NEI-30 Dinion Infrared Imager, designed for poles with a diameter of 100‑380 mm (4‑15 in.), white

Commercial Type No.: VG4-A-9541
Product No.: F.01U.123.433

 
 

VG4-A-9542 Corner Mount Adapter

Corner mount adapter for an AutoDome Series pendant arm or a VEI-30 or NEI-30 Dinion Infrared Imager

Commercial Type No.: VG4-A-9542
Product No.: F.01U.123.434

 

VG4-A-9543 Pipe Mount

Pipe mount, white, for an AutoDome Series pendant housing

Commercial Type No.: VG4-A-9543
Product No.: F.01U.009.673

 
 

VG4-A-PSU1 120 VAC Power Supply Unit

120 VAC, 100 W, white, for an AutoDome Series camera

Commercial Type No.: VG4-A-PSU1
Product No.: F.01U.261.377

 

VG4-A-PSU2 230 VAC Power Supply Unit

230 VAC, 100 W, white, for an AutoDome Series camera

Commercial Type No.: VG4-A-PSU2
Product No.: F.01U.009.668

 
 

VGA-SBOX-COVER Cover for AutoDome Power Supply Boxes

Commercial Type No.: VGA-SBOX-COVER
Product No.: F.01U.010.505

 
VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit

VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit

Ethernet media converter video transmitter/data receiver fiber optic kit

Commercial Type No.: VG4-SFPSCKT
Product No.: F.01U.142.529

 
 

VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply Boxes

Trim skirt for the following AutoDome Series power supply boxes: VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2

Commercial Type No.: VG4-A-TSKIRT
Product No.: F.01U.201.236

 

VGA-BUBBLE-PCLA Clear High-resolution Bubble for a Pendant Housing

Low-impact acrylic bubble

Commercial Type No.: VGA-BUBBLE-PCLA
Product No.: F.01U.247.818

 
 

VGA-BUBBLE-PTIA Tinted High-resolution Bubble for a Pendant Housing

Low-impact acrylic bubble

Commercial Type No.: VGA-BUBBLE-PTIA
Product No.: F.01U.247.820

 
BVIP AES 128 Bit Encryption

BVIP AES 128 Bit Encryption

BVIP AES 128‑bit encryption site license. This license is required only once per installation. It enables encrypted communication between BVIP devices and management stations.

Commercial Type No.: MVS-FENC-AES
Product No.: F.01U.261.234